Learn fiberglass-silicon molds and sculpture
- 4.5
-
![]()
![]()
![]()
![]()
![]()
Brief Introduction
Learn how to make perfect copies of your original molds with traditional technique. Hollow copies. Suitable for BronzesDescription
More than 600 students in the same Spanish version! This course allows you to learn how to make three-dimensional pieces of resin and fiberglass from an original piece: it can be a piece of your creation or simply an object that you love.
To achieve this, we will carry out the entire process step by step: we will create a mold made of silicone rubber with resin shell with glass fiber and we will make the hollow "emptying" also of resin with fiberglass (the final result).
Once you make a silicon rubber mold, you can make numerous pieces from these: just repeat the process of "emptying" as many times as you want, all will be identical to the original object.
You can create replicas of your own modeling in plasticine, mud, epoxy, ceramics etc or replicate other pieces of rigid material.
This technique is THE BASIS OF:
- Traditional sculpture to create more than one piece from the original modeling. The final piece can be resin and fiberglass (as in this video), filled resin without fiberglass, plaster or cement, any other material
- the technique of lost wax in bronze. From this same mold can be made waxes that in the foundry are used to create the final bronzes - soon we will be uploading a video of how to make a bronze work
- in the ART TOYS industry to create identical models that you can then customize, modify and intervene.
Know the most indicated and professional materials and the creative process step by step.
Make your own piece thanks to simple and clear instructions.
IT IS THE IDEAL COMPLEMENT OF THE MODELING COURSE, look for it in Udemy:
- LEARN THE SECRETS OF SCULPTURE AND PROFESSIONAL MODELING
- LEARN TU SCULPT THE MALE BODY
CLARIFICATION:
- In this course "Learn the secrets of fiberglass and silicon molds and sculptures" the final figure is hollow (fiberglass is used in layers) and filled (optional) with polyurethane, although it can be left hollow (for example to make a lamp ) THIS TECHNIQUE IS SUITABLE FOR MEDIUM OR LARGE PARTS
- In the course "how to mold and cast in resin the human figure" the final figure is solid (filled with resin) and fiberglass is NOT used. THIS TECHNIQUE IS SUITABLE FOR SMALL OR MEDIUM PIECES
Do not miss the advice and techniques of a professional!
Remember that you have a 30 day guarantee!
Requirements
- Requirements
- No knowledge of sculpture of any kind is necessary.
- A table and a bench with good light
- A space to work VENTILATED, since the materials used are chemical. A secluded space where you live is ideal (basement, rooftop or a studio)
- Use of adequate protections: gloves and mask with filters
- HERRAMIENTAS: Espatula dental plana, Taladro, Mototul (opcional), Brochas, Cutter, Desarmador, Tornillos y tuercas
- The materials we use are: Spray separator (release agent), Spray clear lacquer, Plasticine, Metal spatula, Silicone rubber, silicone diluent (optional) and TP catalyst, silicone coloring (optional), Cups and tongue-swings, Brushes, Gaza, Polyester resin (normal type or crystal) and its catalyst, Fiberglass, Cabosil (resin bonding agent), automotive paste to be repaired, Water sandpaper (150 and 240), rigid Polyurethane, Thinner, Wire
Francesca Dalla Benetta
4.5 Raiting
Learn fiberglass-silicon molds and sculpture
- 4.5
-
![]()
![]()
![]()
![]()
![]()
Learn how to make perfect copies of your original molds with traditional technique. Hollow copies. Suitable for Bronzes This technique is THE BASIS OF:...
How to mold and cast in resin the human figure (sculpture)
- 4.7
-
![]()
![]()
![]()
![]()
![]()
Learn how to make perfect molds and copies with traditional technique. SOLID RESIN. Suitable for Bronzes More than 100 students in the Spanish version...
